It is currently Fri Jun 23, 2017 4:46 pm Advanced search

Spray transfer

mig and flux core tips and techniques, equipment, filler metal

Re: Spray transfer

Postby Farmwelding » Wed Mar 01, 2017 9:00 am

Hah. This is at my school so it's blacktop but usually they ring them at least to the door to pick them up. My teacher told me where they were, we were doing the ACT at the time so nothing I could have done anyways, and when he told me I immediately said that there is no way in hell in bringing down by hand. Cause I'm sure I couldn't use a cart because it isn't safe for me. I am sure our schools safety coordinator, who we got along fine without for 50 years, would find it unsafe
Funny part is by me taking a safety test and my local tech school I am pretty much more qualified for his job than he is. I guess good safety coordinators and inspectors are like good weld inspectors
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Farmwelding
Weldmonger
 
Posts: 1169
Joined: Thu Mar 10, 2016 11:37 pm
Location: Wisconsin

Re: Spray transfer

Postby MinnesotaDave » Wed Mar 01, 2017 3:22 pm

Nothing wrong with a 2 wheel cart. They roll fine - put a strap on it.
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Airco 300 - Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
User avatar
MinnesotaDave
Weldmonger
 
Posts: 1481
Joined: Sun Oct 27, 2013 10:57 pm
Location: Bemidji MN, U.S.A.

Re: Spray transfer

Postby weldin mike 27 » Thu Mar 02, 2017 6:01 am

We have these "safe" trollies that have a winch on them to lift the gas bottle up to the back of the welder. problem is they were designed by a ham fisted mong. They have almost no leverage and almost no ground clearance. Didn't stop them costing about a K i reckon.
User avatar
weldin mike 27
Weldmonger
 
Posts: 3287
Joined: Fri Apr 01, 2011 10:59 pm
Location: Australia; Victoria

Re: Spray transfer

Postby exnailpounder » Thu Mar 02, 2017 9:24 am

MinnesotaDave wrote:Nothing wrong with a 2 wheel cart. They roll fine - put a strap on it.

Be advised...he didn't tell you to use a strap-on..he said to use a strap :lol:
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
exnailpounder
Weldmonger
 
Posts: 2461
Joined: Thu Dec 25, 2014 9:25 am
Location: near Chicago

Re: Spray transfer

Postby MinnesotaDave » Thu Mar 02, 2017 2:04 pm

exnailpounder wrote:
MinnesotaDave wrote:Nothing wrong with a 2 wheel cart. They roll fine - put a strap on it.

Be advised...he didn't tell you to use a strap-on..he said to use a strap :lol:


Who knew the hyphen had so much power :D
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Airco 300 - Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
User avatar
MinnesotaDave
Weldmonger
 
Posts: 1481
Joined: Sun Oct 27, 2013 10:57 pm
Location: Bemidji MN, U.S.A.

Re: Spray transfer

Postby Farmwelding » Thu Mar 02, 2017 2:20 pm

MinnesotaDave wrote:
exnailpounder wrote:
MinnesotaDave wrote:Nothing wrong with a 2 wheel cart. They roll fine - put a strap on it.

Be advised...he didn't tell you to use a strap-on..he said to use a strap :lol:


Who knew the hyphen had so much power :D

The English language has so many issues. So many weird rules and words that can be so close
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Farmwelding
Weldmonger
 
Posts: 1169
Joined: Thu Mar 10, 2016 11:37 pm
Location: Wisconsin

Re: Spray transfer

Postby exnailpounder » Thu Mar 02, 2017 5:22 pm

MinnesotaDave wrote:
exnailpounder wrote:
MinnesotaDave wrote:Nothing wrong with a 2 wheel cart. They roll fine - put a strap on it.

Be advised...he didn't tell you to use a strap-on..he said to use a strap :lol:


Who knew the hyphen had so much power :D

Pointing that hyphen out might have just saved someone a lot of trouble :lol:
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
exnailpounder
Weldmonger
 
Posts: 2461
Joined: Thu Dec 25, 2014 9:25 am
Location: near Chicago

Re: Spray transfer

Postby Poland308 » Thu Mar 02, 2017 5:45 pm

Who knew the hyphen had so much power :D[/quote]
Pointing that hyphen out might have just saved someone a lot of trouble :lol:[/quote]


Not to mention what a pain in the ass that mistake can be.
I have more questions than answers

Josh
Poland308
Weldmonger
 
Posts: 2003
Joined: Thu Sep 10, 2015 8:45 pm
Location: Iowa

Re: Spray transfer

Postby exnailpounder » Thu Mar 02, 2017 5:47 pm

Poland308 wrote:Who knew the hyphen had so much power :D

Pointing that hyphen out might have just saved someone a lot of trouble :lol:[/quote]


Not to mention what a pain in the ass that mistake can be.[/quote]
Pun intended? :lol:
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
exnailpounder
Weldmonger
 
Posts: 2461
Joined: Thu Dec 25, 2014 9:25 am
Location: near Chicago

Re: Spray transfer

Postby PeteM » Thu Mar 02, 2017 6:06 pm

:lol: Man that dolly just got way more dangerous! The safety director would be jumping all over that.

There are some things that you just can't let slide.
PeteM
Ace
 
Posts: 263
Joined: Sat Dec 03, 2016 11:28 am
Location: Pittsburgh

PreviousNext

Return to Mig and Flux Core - gas metal arc welding & flux cored arc welding