mig and flux core tips and techniques, equipment, filler metal
Gungfudan
  • Posts:
  • Joined:
    Fri Nov 25, 2016 9:20 am

I purchased a new mig gun http://weldingdirect.com/00bi14kstmig1.html and hooked it up and went to turn the mig machine on and got nothing. I don't have a multimeter at the house so I have to wait till Monday to get one from work. I might have needed to get the double wire trigger instead of the single wire but I was not sure since the original gun was rigged
This is the original gun that is rigged
This is the original gun that is rigged
IMG_2940.JPG (37.92 KiB) Viewed 334 times
.

How the new is wired
How the new gun is wired
How the new gun is wired
IMG_2941.JPG (25.87 KiB) Viewed 334 times
I really need this thing to work so any help is greatly appreciated.
Gungfudan
  • Posts:
  • Joined:
    Fri Nov 25, 2016 9:20 am

I checked the voltage on the other side of the on/off switch and it has voltage. So now I really don't know what it would be.

I don't really know where to check next. I checked the voltage going to the relay and it has voltage. I really don't know where to measure the voltage next any help please!!! I need this rig to work I have welding to do on my truck and I also have to weld some stainless steel. Help please!!!

I can take more pictures if needed.
Post Reply