It is currently Fri Feb 23, 2018 6:44 am Advanced search

wire sizing

mig and flux core tips and techniques, equipment, filler metal

wire sizing

Postby marten » Sat May 13, 2017 4:37 pm

Does the wire size make any difference as it relates to the thickness of the steel. I am building a truck and working on the body, 16 ga and the frame parts 1/8" thick.
New Member
Posts: 2
Joined: Sat Apr 22, 2017 6:30 am

Re: wire sizing

Postby MinnesotaDave » Sat May 13, 2017 5:10 pm

Yes it does matter - the thinner wire, .024" can run at low amps very stable and is great for car body thickness and the 1/8" thickness you are planning to weld.

Each wire has a range that it runs well at, when outside that range (low or high) the arc is unstable and doesn't "run right"

Here is an example chart:
.024" would be even farther left

image.png (190.38 KiB) Viewed 258 times
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Airco 300 - Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
Tried being normal once, didn't take....I think it was a Tuesday.
User avatar
Posts: 1690
Joined: Sun Oct 27, 2013 10:57 pm
Location: Bemidji MN, U.S.A.

Return to Mig and Flux Core - gas metal arc welding & flux cored arc welding