It is currently Thu Oct 19, 2017 8:55 am Advanced search

Voltage Settings Gasless Flux Core

mig and flux core tips and techniques, equipment, filler metal

Voltage Settings Gasless Flux Core

Postby Brettm357 » Thu Jul 20, 2017 5:02 am

When setting voltage for Gasless Flux Core are you suppose to set it just above stubbing eg: 5 on fine volts stubs but 6 is a continuous arc
Brettm357
Active Member
 
Posts: 31
Joined: Tue Jun 13, 2017 8:29 am

Re: Voltage Settings Gasless Flux Core

Postby MinnesotaDave » Fri Jul 21, 2017 7:06 am

That topic starts on pg 38 of lincoln's FCAW guide.
http://www.lincolnelectric.com/assets/g ... c32400.pdf

image.png
image.png (274.21 KiB) Viewed 115 times
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Airco 300 - Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
User avatar
MinnesotaDave
Weldmonger
 
Posts: 1565
Joined: Sun Oct 27, 2013 10:57 pm
Location: Bemidji MN, U.S.A.


Return to Mig and Flux Core - gas metal arc welding & flux cored arc welding