It is currently Tue Feb 20, 2018 5:24 pm Advanced search

Welding projects...

mig and flux core tips and techniques, equipment, filler metal

Welding projects...

Postby Racer5x » Wed Mar 21, 2012 12:05 am

I don't know if this is the right place or not but sorry if it isn't...
I'm looking for some welding/fabrication projects that are small that I could make a little money off of. Also I have a flux core/mig welder....
Thanks
Corey
Thanks,
Corey
Racer5x
New Member
 
Posts: 11
Joined: Sun Mar 04, 2012 10:24 pm
Location: Muncie,Indiana

Re: Welding projects...

Postby weldin mike 27 » Wed Mar 21, 2012 6:13 am

Hi there,

Depending on where you live, fishing rod holders, camp fire gear such as grills and spits. Make up a few real basic ones, of designs ripped off from shops or the net. Take em to the market (flea) or whatever you call it. Make it known that you can make custom ones of the items for people if they have ideas. In the winter time, out door stoves and fire places are good, pot belly stoves we call em in australia, You can make em out of any round thing, truck rims or brake drums. tank or drum. CLEAN DRUMS FIRST!!!!!!! Or use one that you know the contents to be not flammable.

Mick
User avatar
weldin mike 27
Weldmonger
 
Posts: 3408
Joined: Fri Apr 01, 2011 10:59 pm
Location: Australia; Victoria

Re: Welding projects...

Postby weldin mike 27 » Wed Mar 21, 2012 6:26 am

PS. There is a specific welding projects section on the main forum menu. 8-)

Mick
User avatar
weldin mike 27
Weldmonger
 
Posts: 3408
Joined: Fri Apr 01, 2011 10:59 pm
Location: Australia; Victoria

Re: Welding projects...

Postby delraydella » Wed Mar 21, 2012 6:21 pm

Gardening stuff usually sells pretty good, stuff like custom trellises, plant stands, etc. A trip to a local gardening supply can give you some good ideas of what people want. There is someone by me who welds garden sculptures out of the wire that holds up those small election signs that you see in peoples yards. Not only is he doing people a favor by removing the signs once the election is over, he also gets free materials and the profits from his artwork.
WeldingSyncrowave 250,Millermatic 252,30a Spoolgun Cutting12" Hi-speed Cutoff Saw, 9x 12 Horizontal Bandsaw MillingGorton 8d Vertical Mill TurningMonarch EE Precision Lathe GrindingBrown & Sharpe #5 Surface Grinder
delraydella
Weldmonger
 
Posts: 647
Joined: Mon Apr 25, 2011 7:35 pm
Location: Detroit, MI

Re: Welding projects...

Postby Racer5x » Wed Mar 21, 2012 8:44 pm

Nice....thanks for the ideas!
Thanks,
Corey
Racer5x
New Member
 
Posts: 11
Joined: Sun Mar 04, 2012 10:24 pm
Location: Muncie,Indiana

Re: Welding projects...

Postby tungstendipper » Tue Jan 23, 2018 9:31 am

Admin010 wrote:During election period in our place, flyers are the most widely recognized approach to pass on the stage and authority designs of a competitor. There are huge flags, canvases, stickers, and other limited time things to be given away. However, flyers are as yet the best pick. One reason why it is the best decision is a result of its moderate cost. Despite the fact that there are different wellsprings of materials, paper is as yet the most practical and eco-accommodating. There are diverse variations of flyers. Some are plain and basic with high contrast print. Some have vivid outlines with the photograph of the competitor. As a result of the popularity for flyer creation amid race period, a considerable measure of printing workplaces offer administrations to the applicants. The one with the least expensive rate wins the greater part of the offers. Notwithstanding shabby rates, they offer extra special things together with the flyers. Just to get more clients, these printing workplaces get ready contrivances. The name and the photograph of the competitors are the most widely recognized data that can be found in decision flyers.
Thanks& regards,
Angel anave
election equipment| ballot boxes


WHAT?? :geek:
Lincoln MP 210, Lincoln Square Wave 200,
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter
3 old socks
tungstendipper
Guide
 
Posts: 146
Joined: Sun Nov 19, 2017 10:09 am

Re: Welding projects...

Postby tweake » Wed Jan 24, 2018 1:13 am

tungstendipper wrote:
WHAT?? :geek:

just a spammer. pays not to reply to them as it makes cleanup a bit harder.
report it and let admin do their bit.

a lot of spammers are doing manual sign ups and even posted "legit" replies so they don't get booted straight away.
tweak it until it breaks
tweake
Active Member
 
Posts: 46
Joined: Mon Dec 18, 2017 4:53 am
Location: New Zealand


Return to Mig and Flux Core - gas metal arc welding & flux cored arc welding