error_outline JavaScript Disabled
mig and flux core tips and techniques, equipment, filler metal
Posts:
Joined:
Wed Oct 23, 2013 3:30 pm
Location:
Palmer AK
Mon May 26, 2014 4:00 pm
We'll start a weld picture thread in each of the forums....
This one will be mig welds. Maybe FCAW too.
Short circut, spray, aluminum.... etc.
I'll start it off.
First one is 1 1/2 square tubing. 16ga wall.
IMG_2762.JPG (38.86 KiB) Viewed 3664 times
IMG_2764.JPG (56.87 KiB) Viewed 3664 times
IMG_2765.JPG (51.79 KiB) Viewed 3664 times
Just a couple welders and a couple of big hammers and torches.
Posts:
Joined:
Wed Oct 23, 2013 3:30 pm
Location:
Palmer AK
Posts:
Joined:
Wed Oct 23, 2013 3:30 pm
Location:
Palmer AK
Mon May 26, 2014 4:19 pm
Now to spray transfer....
3/8 plate. No bevel....
225amps.....
First pass.
IMG_2770.JPG (36.92 KiB) Viewed 3660 times
IMG_2777.JPG (113.09 KiB) Viewed 3660 times
IMG_2778.JPG (96.02 KiB) Viewed 3660 times
Just a couple welders and a couple of big hammers and torches.
Posts:
Joined:
Mon May 26, 2014 2:53 am
Location:
Melbourne Australia
Mon May 26, 2014 4:26 pm
Not a bad first go image.jpg (71.15 KiB) Viewed 3660 times
This is my first attempt at flux core 3F
I have a soldering iron!
Posts:
Joined:
Wed Oct 23, 2013 3:30 pm
Location:
Palmer AK
Mon May 26, 2014 5:03 pm
2nd and third passes....
It'll hold.
IMG_2784.JPG (58.71 KiB) Viewed 3657 times
IMG_2785.JPG (67.18 KiB) Viewed 3657 times
Just a couple welders and a couple of big hammers and torches.
Mon May 26, 2014 9:08 pm
I think this is one of the only ones I have on my computer that is not on here. I was going to start that thread on the "The Best of..." for the best looking welds we can put down and I never got any further than talk. Anyway I do not know the settings off hand on this one, I do know it is .052.
Attachments
triple mig pass.JPG (104.5 KiB) Viewed 3644 times
Tue May 27, 2014 7:17 am
Wow,
Posts:
Joined:
Sun Oct 27, 2013 10:57 pm
Location:
Big Lake/Monticello MN, U.S.A.
Tue May 27, 2014 7:30 am
weldin mike 27 wrote: Wow,
That's one fad I wish would die out...
Dave J.
Tue May 27, 2014 7:56 am
Come for a holiday over here. Its not common at all.
Mick
Tue May 27, 2014 7:56 am
weldin mike 27 wrote: Wow,
Well they say to stick with what you know. I am not the best at the mig like tig and much prefer the baby butt smooth welds.
-Jonathan
Posts:
Joined:
Sun Oct 27, 2013 10:57 pm
Location:
Big Lake/Monticello MN, U.S.A.
Tue May 27, 2014 9:03 am
weldin mike 27 wrote: Come for a holiday over here. Its not common at all.
Mick
Australia is definitely on my list to visit one day
Dave J.
Posts:
Joined:
Mon May 26, 2014 2:53 am
Location:
Melbourne Australia
Tue May 27, 2014 5:49 pm
4F flux core on 3/8 (10mm)
Training assessment 4f flux core image.jpg (46.22 KiB) Viewed 1571 times
I have a soldering iron!
Wed May 28, 2014 6:45 am
Hey,
Dave, glad to hear. We are a very big Country, but everything is spread out. Plan a month or so for a bit of a look.
Mick
Wed May 28, 2014 11:56 pm
Unfortunately the place I work at wants the mig like tig look currently
Thu May 29, 2014 7:19 am
Because the tig look is so attractive, I don't think that will ever fade out, especially for what you are doing. I will admit it is sexy and it is a skill.
Posts:
Joined:
Mon Mar 07, 2011 1:10 pm
Thu May 29, 2014 5:44 pm
nothing special, just a little practice with a jacked up liner.
Attachments
photo.JPG (60.62 KiB) Viewed 1528 times
Sun Jun 01, 2014 12:35 am
It does look cool like you said good idea on this thread
Posts:
Joined:
Sun Dec 15, 2013 2:48 am
Location:
North Texas
Mon Jul 14, 2014 5:24 pm
Not my best example but an attempt at the mig like tig
Attachments
image.jpg (61.46 KiB) Viewed 1475 times
If ya ain't burnin ya ain't earnin
Posts:
Joined:
Fri Jan 31, 2014 5:14 am
Location:
pensacola, Fl
Mon Jul 14, 2014 6:23 pm
Here's one I did with My Clarke 160EN I had.
Welds are on a s13 240sx Control Arm. Reinforcement on bottom with 1/8" mild steel plate. Not great but not bad for HF welder.
I tried to do the TIG Scallop that you could make with a mig gun( "MIG like TIG"), almost a year ago....... I could only try and work with it running cold though> Also it helped that I was using the schools Miller XMT 304
Posts:
Joined:
Tue Aug 05, 2014 7:43 pm
Tue Aug 05, 2014 8:02 pm
I don't usually weld, but when I do people usually gather taking notes and pictures"
Nice... That's a great saying !!
I agree with mig should look like mig and tig should look like tig. Don't get me wrong...some of the guys that do and do it well and it looks great.
Posts:
Joined:
Tue Jan 07, 2014 9:06 pm
Location:
Elizabeth, WV
Wed Aug 06, 2014 9:43 pm
Kevinstj wrote: I don't usually weld, but when I do people usually gather taking notes and pictures"
Nice... That's a great saying !!
I agree with mig should look like mig and tig should look like tig. Don't get me wrong...some of the guys that do and do it well and it looks great.
What if your mig looks like tig?
By your philosophy my mig should look like mig but if my mig looks like tig then my mig shouldn't look like tig because tig should look like tig and mig should look like mig but my mig looks like tig so its all screwed up.
I think a lot of people judge appearance instead of quality. Different people have different techniques and different appearances.
It's always best to build your own, especially when it comes to hitches!!!
Wed Aug 06, 2014 10:40 pm
I modified my technique recently. ......this is where I am.
Posts:
Joined:
Tue Jan 07, 2014 9:06 pm
Location:
Elizabeth, WV
Wed Aug 06, 2014 10:41 pm
Not bad at all. I would watch the upper side closely but not bad at all.
It's always best to build your own, especially when it comes to hitches!!!
Sun Aug 10, 2014 11:29 am
Posts:
Joined:
Fri Aug 22, 2014 9:22 pm
Location:
In a state of confusion.
Sat Aug 23, 2014 4:41 pm
Mig pulse with .045 wire.
Mig pulse .045 next to mig short circuit with .035
Piece welded in place on machine.
Shannon
Well they say to stick with what you know. I am not the best at the mig like tig and much prefer the baby butt smooth welds.
By your philosophy my mig should look like mig but if my mig looks like tig then my mig shouldn't look like tig because tig should look like tig and mig should look like mig but my mig looks like tig so its all screwed up. 
