It is currently Fri Mar 24, 2017 11:55 pm Advanced search

My shop's hiring... Slidell, LA

Whos hiring and where, pay, hours, Certification tests given, tig, mig, stick?

My shop's hiring... Slidell, LA

Postby Otto Nobedder » Fri Nov 18, 2016 7:37 pm

I cut and pasted something I posted previously, but we're hiring again, and likely more than one:

There is now a job available in Slidell.

The company is Elite Cryogenics, and is where I work.

The most basic requirements are TIG on SS pipe, and MIG on carbon/stainless structure, and mechanical aptitude.
Additional skills that will make a standout candidate include pipefitting, fabrication, instrument fitting, and electrical. Not all (or any) are required, but each is a plus.

Steve
User avatar
Otto Nobedder
Weldmonger
 
Posts: 7782
Joined: Thu Jan 06, 2011 11:40 pm
Location: Near New Orleans

Re: My shop's hiring... Slidell, LA

Postby Olivero » Fri Jan 06, 2017 1:12 pm

After seeing the type of work your doing, if I was in LA, I might just consider it :D
if there's a welder, there's a way
User avatar
Olivero
Ace
 
Posts: 203
Joined: Tue Dec 13, 2016 9:24 pm
Location: Clearwater Florida

Re: My shop's hiring... Slidell, LA

Postby Otto Nobedder » Sat Jan 07, 2017 1:38 am

Olivero wrote:After seeing the type of work your doing, if I was in LA, I might just consider it :D


We're still trying to hire, so if you know someone in my area... Three no-shows in a row for a weld test... Must be padding that unemployment. That's sad, since unemployment here is a weak check.

Steve S
User avatar
Otto Nobedder
Weldmonger
 
Posts: 7782
Joined: Thu Jan 06, 2011 11:40 pm
Location: Near New Orleans

Re: My shop's hiring... Slidell, LA

Postby Ryan_82 » Sat Jan 07, 2017 5:01 pm

What kind of weld test is it Otto?
User avatar
Ryan_82
Active Member
 
Posts: 44
Joined: Sun Oct 16, 2016 11:36 am
Location: North Carolina

Re: My shop's hiring... Slidell, LA

Postby Otto Nobedder » Sat Jan 07, 2017 7:50 pm

Ryan_82 wrote:What kind of weld test is it Otto?


It's a pretty simple "Does he know what he's doing?" test, judged visually. There's a MIG coupon, welding a 1" stub of 2" scd, 10 pipe to a plate, inside and out. There's a simple Tee joint, 1/4", TIG, and a 1 1/2" TIG pipe weld, scd. 10, roll-out OK. All material is 304 SS.

If you can set the machine, do a decent root and cap, demonstrate you understand back-purge, and prep your coupons yourself, it's all good. We will work with and develop welders with these basic skills.

Keep in mind, this is not a welding-only job.

Steve S
User avatar
Otto Nobedder
Weldmonger
 
Posts: 7782
Joined: Thu Jan 06, 2011 11:40 pm
Location: Near New Orleans


Return to Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs