Okay.
How about non-lemons where chopping up panels isn't an option?[/quote]
Otto is right but I still can't bring myself to do it that way. Lemons is a cheap form of racing. But I treat everybuild the same no matter what. You might be aloud to do it that way but I still do it the way I explained.
What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
How about posting some pics so other welders can get some ideas?
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Bill w wrote:Okay.
How about non-lemons where chopping up panels isn't an option?
Otto is right but I still can't bring myself to do it that way. Lemons is a cheap form of racing. But I treat everybuild the same no matter what. You might be aloud to do it that way but I still do it the way I explained.[/quote]
Hey Bill...thats' pretty ingenious...does everyone do it your way or did you think that up? I have never done a cage and don't know if I would have thought of that if I did have to do one. I try to learn something new every day and I just did
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
No I actually had seen this done on a jeep xj years ago. And thought that was a good idea till I had to do one in an xj myself and decided to do it different.
But with an scca car you have to fallow rules and the only way to fallow these rules is to do it this way. Or cut a hole in the roof. And I'm not into that. Remember anytime you take on a project like this you have got to be as professional. This has to pass an inspection and keep the driver safe. Your taking on a big responsibility with a project like this.
But with an scca car you have to fallow rules and the only way to fallow these rules is to do it this way. Or cut a hole in the roof. And I'm not into that. Remember anytime you take on a project like this you have got to be as professional. This has to pass an inspection and keep the driver safe. Your taking on a big responsibility with a project like this.
This is the pic of the jeep cage I did. No holes in the floor little tight welding but it was built in 3 sections then installed back into the jeep already painted I just had to clean up where I was welding. Then I added the support tubes after it was installed. And it was done.
- Attachments
-
- 0830161717.jpg (47.65 KiB) Viewed 4397 times
This applies to most sanctioned/regulated race classes.Bill w wrote:But with an scca car you have to fallow rules and the only way to fallow these rules is to do it this way.
The organisers or sanctioning body (eg. FIA in europe) usually have quite specific rules about the type of cage/cell and how it has to be constructed and installed in a car/shell for this class.
These rules tends to also specify what can and can not be cut/welded/altered on the original shell of the car.
Fitting these cages/cells while correctly following the regulations set can get quite 'interesting' especially as in various cases the cages/cells can not be 'self built' but you have to buy the cage partially assembled and are only allowed to install it and finish it up.
No modifications or changes in these cases are allowed to the cage or the approval is voided making the car no longer acceptable for the class it needs to compete in. Which was kinda the point of fitting the cage
Bye, Arno.
Jim FLinchbaugh
- Jim FLinchbaugh
-
Workhorse
-
Posts:
-
Joined:Thu Sep 01, 2016 11:56 pm
-
Location:Kalispell Montana
- LtBadd
-
Weldmonger
-
Posts:
-
Joined:Sun Apr 12, 2015 4:00 pm
-
Location:Clearwater FL
-
Contact:
I can imagine, I hate painting to begin with.Jim FLinchbaugh wrote:The only thing worse than building a cage, is painting it lol
Seeing this cage reminded me of the movie Death Proof
"Death Proof is a 2007 American exploitation film written and directed by Quentin Tarantino. It stars Kurt Russell as a stuntman who murders young women in staged car accidents using his "death-proof" stunt car."
Richard
Website
Website
Little update I had to take a little over a week off for some other things. I will have the done by Saturday also have a couple of welds to repair machine started acting funny. Nothing major but I don't like the look of the weld.so here is another pic. Also have a few more tubes to put in. But you guys get the idea.
- Attachments
-
- 0219171750.jpg (56.2 KiB) Viewed 4297 times
This one is complete and suppose to be on the track this weekend. But I haven't talked to the owner yet to see if it made it. Last I know it was at the tuner but having problems.
- Attachments
-
- 18121438_790529231111309_1803067323968835480_o.jpg (41.82 KiB) Viewed 4225 times
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
Id rather have one of these.LtBadd wrote:Bill w wrote:Painted pic
with all the traffic here in FL I could use that setup
- Attachments
-
- image.png (456.98 KiB) Viewed 3865 times
-
- image.png (474.18 KiB) Viewed 3865 times
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
Yeah in Chevy guy myself for pickups at least but it's the thought that counts.Bill w wrote:Yeah because the axles are crying under that Ford and the jeep is just ridiculous. The old Subaru has that cheap death race feel lol
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
Return to “Welding Projects - Welding project Ideas - Welding project plans”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities