What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
How about posting some pics so other welders can get some ideas?
Die electric flange kits for bolting up flanges use a plastic sleeve that looks like a big straw ( about the same material and thickness) to go around the bolts. And then fiber washers that look like circuit board material. About 1/8 thick.
I have more questions than answers
Josh
Josh
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
That would certainly save some time. I'm gonna check McMaster-Carr this morning.Poland308 wrote:Die electric flange kits for bolting up flanges use a plastic sleeve that looks like a big straw ( about the same material and thickness) to go around the bolts. And then fiber washers that look like circuit board material. About 1/8 thick.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
I am using something like these with my build...
http://www.ebay.com/itm/6-Glastic-2015- ... Swol5Y3Dne
http://www.ebay.com/itm/6-Glastic-2015- ... Swol5Y3Dne
I Used a set of rubber mounts like that for a pedestal grinder that I built it makes it kind of hard to tension the belt because it begins to sideload the rubber grommets.
I have more questions than answers
Josh
Josh
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
All you have to do is isolate your motor. My set up is different.LtBadd wrote:Sounds like you may already have an answer, I haven't gotten that far.exnailpounder wrote:I was thinking about some Delrin sleeves and thrust washers..would Delrin be a good choice? I know it's very machinable.motox wrote:jeff
you have a lath, fab up some nylon bungs to separate metal from bolts.
craig
Question, may be stupid, even with a metal frame if the ground strap remains on the shaft, wouldn't the current take the most direct path (of least resistance)?
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
- 20170501_123827.jpg (52.97 KiB) Viewed 1237 times
- 20170501_125329.jpg (56.14 KiB) Viewed 1237 times
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Return to “Welding Projects - Welding project Ideas - Welding project plans”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities