What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
Post Reply
Burley Industries
  • Posts:
  • Joined:
    Fri Dec 15, 2017 4:43 pm
  • Location:
    Boise, Idaho

I decided to build my wife's Christmas gift this year. It's a wine holder/wall art(ish). I got a few other people interested and I'm building a few more now. I TIG welded the first one but that took way to long to be able to make any money on the additional ones. I just did my best to dial in my miller 211 to minimize the splatter so the finish prep didn't loose all the time I gained from switching to MIG.
20171224_091354.jpg
20171224_091354.jpg (48.18 KiB) Viewed 1210 times
Attachments
20171231_161521.jpg
20171231_161521.jpg (54 KiB) Viewed 1210 times
20171231_135220.jpg
20171231_135220.jpg (87.88 KiB) Viewed 1210 times
20171231_121319.jpg
20171231_121319.jpg (77.03 KiB) Viewed 1210 times
20171224_091342.jpg
20171224_091342.jpg (42.41 KiB) Viewed 1210 times
Jake Burley
@burleyindustriesllc
cj737
  • Posts:
  • Joined:
    Thu Sep 29, 2016 8:59 am

If you take a few minutes and scotchbrite the cooled roll before you weld it, it will yield less spatter and less clean up afterwards. You can also spray Pam on the metal to prevent any spatter beads from sticking.
Burley Industries
  • Posts:
  • Joined:
    Fri Dec 15, 2017 4:43 pm
  • Location:
    Boise, Idaho

cj737 wrote:If you take a few minutes and scotchbrite the cooled roll before you weld it, it will yield less spatter and less clean up afterwards. You can also spray Pam on the metal to prevent any spatter beads from sticking.
I took each piece to the belt sander. The splatter isn't bad, no matter what, you are going to get some. I've never heard of the PAM trick. I wonder how hard it is to get back off to be able to paint.
Jake Burley
@burleyindustriesllc
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

Pam is a mother to get off. Worse than oil or grease.
I have more questions than answers

Josh
cj737
  • Posts:
  • Joined:
    Thu Sep 29, 2016 8:59 am

A simple Acetone wile and you’re back to bare metal... :?
homeboy
  • Posts:
  • Joined:
    Mon Dec 19, 2016 11:52 pm
  • Location:
    Southern Ontario Canada

Get a spray can of the LIGHT anti-spatter spray (should sound like water when you shake the can) that says " paint compatable" and spray a light mist coating (barely wet) before welding. Dress welds,wire wheel etc. as you like and a quick wash down with spray brake cleaner, blow off ,tack cloth,prime, paint. I have stuff sitting outside for years done like this with no paint problems. If the raw steel is oily to begin with I usually give the stock a quick wash before it even comes inside the shop to be nicer to handle :D .
Sprockmonster
  • Posts:
  • Joined:
    Tue Dec 31, 2013 1:59 pm
  • Location:
    Connecticut

Switch back to tig welding [WINKING FACE]
Post Reply