What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
My project
Post Reply
User avatar
  • Posts:
  • Joined:
    Mon Mar 10, 2014 6:49 pm
  • Location:
    Michigan

I have antique tractors that I pull and play with. But don't have any way to haul them. So i bought an international truck. Needs a deck.here's my progress.[attachment=-1]uploadfromtaptalk1396473762105.jpg[/attachment][attachment=-1]uploadfromtaptalk1396473780525.jpg[/attachment][attachment=-1]uploadfromtaptalk1396473805039.jpg[/attachment]

Sent from my DROID RAZR HD using Tapatalk
Attachments
uploadfromtaptalk1396473805039.jpg
uploadfromtaptalk1396473805039.jpg (40.49 KiB) Viewed 2307 times
uploadfromtaptalk1396473780525.jpg
uploadfromtaptalk1396473780525.jpg (28.27 KiB) Viewed 2307 times
uploadfromtaptalk1396473762105.jpg
uploadfromtaptalk1396473762105.jpg (30.33 KiB) Viewed 2307 times
Top
User avatar
  • Posts:
  • Joined:
    Mon Mar 10, 2014 6:49 pm
  • Location:
    Michigan

[attachment=-1]uploadfromtaptalk1396473905556.jpg[/attachment][attachment=-1]uploadfromtaptalk1396473917862.jpg[/attachment][attachment=-1]uploadfromtaptalk1396473934371.jpg[/attachment]

Sent from my DROID RAZR HD using Tapatalk
Attachments
uploadfromtaptalk1396473934371.jpg
uploadfromtaptalk1396473934371.jpg (42.58 KiB) Viewed 2306 times
uploadfromtaptalk1396473917862.jpg
uploadfromtaptalk1396473917862.jpg (46.79 KiB) Viewed 2306 times
uploadfromtaptalk1396473905556.jpg
uploadfromtaptalk1396473905556.jpg (44.33 KiB) Viewed 2306 times
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Man,
That looks like fun, I'm prolly gonna be doing something like that soon.
Nothing like working on trucks.
What tractors you got???

~John
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 10:13 pm
  • Location:
    Eddy, TX

Looking good to me!
-Jonathan
Top
Cricket
  • Posts:
  • Joined:
    Tue Aug 20, 2013 10:49 pm
  • Location:
    Oregon, WI

Does it have enought clearance for the tire when it is fully pushed up? In case the truck is loaded and hits some bump on a road... :roll:
Top
User avatar
  • Posts:
  • Joined:
    Mon Mar 10, 2014 6:49 pm
  • Location:
    Michigan

I have john deeres. There is about 5.5 to 6 inches from the tire to chanel . Being its not air ride I thing I should be fine.

Sent from my DROID RAZR HD using Tapatalk
Top
User avatar
  • Posts:
  • Joined:
    Mon Mar 10, 2014 6:49 pm
  • Location:
    Michigan

[attachment=-1]uploadfromtaptalk1397250749059.jpg[/attachment]

Sent from my DROID RAZR HD using Tapatalk
Attachments
uploadfromtaptalk1397250749059.jpg
uploadfromtaptalk1397250749059.jpg (26.84 KiB) Viewed 2106 times
Top
User avatar
  • Posts:
  • Joined:
    Mon Mar 10, 2014 6:49 pm
  • Location:
    Michigan

Here is a picture of my up hill 7018 cap on beaver tail / frame.

Sent from my DROID RAZR HD using Tapatalk
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Looks good!!

Here's a truck, I'm probably gonna be doing the same thing on.
IMG_1344.JPG
IMG_1344.JPG (79.76 KiB) Viewed 2093 times
IMG_1345.JPG
IMG_1345.JPG (81.43 KiB) Viewed 2093 times
IMG_1209.JPG
IMG_1209.JPG (70.43 KiB) Viewed 2093 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
Bill Beauregard
  • Posts:
  • Joined:
    Thu Jan 24, 2013 9:32 pm
  • Location:
    Green Mountains of Vermont

ejpoter wrote:I have antique tractors that I pull and play with. But don't have any way to haul them. So i bought an international truck. Needs a deck.here's my progress.[attachment=-1]uploadfromtaptalk1396473762105.jpg[/attachment][attachment=-1]uploadfromtaptalk1396473780525.jpg[/attachment][attachment=-1]uploadfromtaptalk1396473805039.jpg[/attachment]

Sent from my DROID RAZR HD using Tapatalk
Looks great! We did a Chevy C65 several years ago steel frame, 2-1/4" oak deck. Mine is rack body dump. I kinda wish we had gone with steel deck. We cut the trees, trucked with the same truck, and had enough oak milled for two floors. Lost my lumber storage when Hurricane Irene damaged the building, so now 7 years in I need new wood. I might better have sprung for steel in the first place.

As a kid I had an IH dealer near. They used an International with dump, and a deck extension. It had mounted under the deck a hydraulic cylinder with two pulleys it had about 13 feet of stroke with compound telescopic cylinder. It gave it 26' of winch cable travel. As I recall it must have dumped at about a four-twelve pitch. A little too steep for real comfort driving a Farmall on so you would winch it on. The thing worked great! When I turned 16 they often let me deliver or pick up. I thought I was a big deal!
Top
User avatar
  • Posts:
  • Joined:
    Mon Mar 10, 2014 6:49 pm
  • Location:
    Michigan

Thanks. I used a section of frame off an early 70s late 60s ford f600. For the beaver tail. Cut out the section I needed and welded it back tougher. Was going to scrap it but looks to cool to get rid of. I will get a pic.

Sent from my DROID RAZR HD using Tapatalk
Top
User avatar
  • Posts:
  • Joined:
    Mon Mar 10, 2014 6:49 pm
  • Location:
    Michigan

[attachment=-1]uploadfromtaptalk1398016618836.jpg[/attachment][attachment=-1]uploadfromtaptalk1398016636945.jpg[/attachment][attachment=-1]uploadfromtaptalk1398016650796.jpg[/attachment]

Sent from my DROID RAZR HD using Tapatalk
Attachments
uploadfromtaptalk1398016650796.jpg
uploadfromtaptalk1398016650796.jpg (44.97 KiB) Viewed 1087 times
uploadfromtaptalk1398016636945.jpg
uploadfromtaptalk1398016636945.jpg (39.32 KiB) Viewed 1087 times
uploadfromtaptalk1398016618836.jpg
uploadfromtaptalk1398016618836.jpg (44.85 KiB) Viewed 1087 times
Top
User avatar
  • Posts:
  • Joined:
    Mon Mar 10, 2014 6:49 pm
  • Location:
    Michigan

The blue truck is the f600. I took a section of frame out of.

Sent from my DROID RAZR HD using Tapatalk
Top
User avatar
  • Posts:
  • Joined:
    Mon Mar 10, 2014 6:49 pm
  • Location:
    Michigan

[attachment=-1]uploadfromtaptalk1398729322056.jpg[/attachment]

Sent from my DROID RAZR HD using Tapatalk
Attachments
uploadfromtaptalk1398729322056.jpg
uploadfromtaptalk1398729322056.jpg (30.07 KiB) Viewed 1063 times
Top
User avatar
  • Posts:
  • Joined:
    Mon Mar 10, 2014 6:49 pm
  • Location:
    Michigan

Truck is usable but not finished.

Sent from my DROID RAZR HD using Tapatalk
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Nice setup!

Apparently no trouble posting....

Steve S
Top
Bill Beauregard
  • Posts:
  • Joined:
    Thu Jan 24, 2013 9:32 pm
  • Location:
    Green Mountains of Vermont

That's very cool! Looks like you've got room for a nice Farmall M also. We live near a former International dealer, We have Internationals. Our friends are former John Deere dealers, (one generation removed), they have John Deeres. We have a horsepower advantage, they have a torque advantage. We have a friendly rivalry at antique tractor pulls.
Top
User avatar
  • Posts:
  • Joined:
    Mon Mar 10, 2014 6:49 pm
  • Location:
    Michigan

No posting works fine. I don't know what was going on.

Sent from my DROID RAZR HD using Tapatalk
Top
User avatar
  • Posts:
  • Joined:
    Mon Mar 10, 2014 6:49 pm
  • Location:
    Michigan

Probably no red on this truck for a while. My brother in law is a farmall guy. I actually store his f20. Needs to be redone. When the deck is done it will easily fight two tractors.

Sent from my DROID RAZR HD using Tapatalk
Top
User avatar
  • Posts:
  • Joined:
    Mon Mar 10, 2014 6:49 pm
  • Location:
    Michigan

[attachment=-1]uploadfromtaptalk1398731995694.jpg[/attachment]

Sent from my DROID RAZR HD using Tapatalk
Attachments
uploadfromtaptalk1398731995694.jpg
uploadfromtaptalk1398731995694.jpg (24.74 KiB) Viewed 1060 times
Top
ewils35
  • Posts:
  • Joined:
    Tue Apr 29, 2014 9:09 am
  • Location:
    Michigan

Thats an awesome looking rig.
Top
User avatar
  • Posts:
  • Joined:
    Mon Mar 10, 2014 6:49 pm
  • Location:
    Michigan

Thank you. Lot of work. 95% by my self.

Sent from my DROID RAZR HD using Tapatalk
Top
Post Reply

Return to “Welding Projects - Welding project Ideas - Welding project plans”