[AKweldshop]

Front grill off a cat dozer.
1/2 in steel.

Rest of the table is 2x2 quare tubing. 1/8 wall.

The rest is raw skill.

IMG_2397.JPG (69.51 KiB) Viewed 1815 times

IMG_2398.JPG (101.83 KiB) Viewed 1815 times

IMG_2399.JPG (63.05 KiB) Viewed 1815 times

[AKweldshop]

IMG_2400.JPG (59.64 KiB) Viewed 1813 times

IMG_2401.JPG (69.5 KiB) Viewed 1813 times

IMG_2402.JPG (53.91 KiB) Viewed 1813 times

[AKweldshop]

IMG_2403.JPG (48.63 KiB) Viewed 1812 times

IMG_2404.JPG (77.66 KiB) Viewed 1812 times

IMG_2405.JPG (66.6 KiB) Viewed 1812 times

[AKweldshop]

IMG_2406.JPG (74.19 KiB) Viewed 1811 times

IMG_2407.JPG (65.88 KiB) Viewed 1811 times

More pics tomorrow...

Hope it wasn't to boring....

~John

[mcoe]

Were those some 6013's laying on the floor? Looks nice, I always like taking old stuff and re purposing it. Like the idea of the dozer grill.

[AKweldshop]

Yes,
I started out using 6013.
I got so fn sick of them, I thru them in the trash.
I used 7018 and 8010 for the rest.

I'll get the pics up as soon as possible.

It's finished.

John

[mcoe]

I need to take pictures of our carry all I re did. I welded a hook to the top of it to hook a chain to and did some bracing. I used 7010 and capped with 7018. It turned out pretty good.

[AKweldshop]

Matt,
What do you pay for a 10lb box of Forney 1/8 7018??

Got some math that needs done...

~John

[mcoe]

About $20 I do believe. It has been a while since I bought rods because I get them for free from my brother in law mostly now.

[kermdawg]

Matt,
What do you pay for a 10lb box of Forney 1/8 7018??

Got some math that needs done...

~John

Hey AK I just paid 10 dollars for a 10 pound box of forney 1/8 7018. Clearance at Ace Hardware who knew welding supplies go on clearance??

[Superiorwelding]

Matt,
What do you pay for a 10lb box of Forney 1/8 7018??

Got some math that needs done...

~John

Hey AK I just paid 10 dollars for a 10 pound box of forney 1/8 7018. Clearance at Ace Hardware who knew welding supplies go on clearance??

That's because they were getting rid of the 7018 to make room for the 6013
-Jonathan

[AKweldshop]

IMG_2410.JPG (104.91 KiB) Viewed 643 times

IMG_2409.JPG (82.4 KiB) Viewed 643 times

IMG_2411.JPG (84.02 KiB) Viewed 643 times

[AKweldshop]

IMG_2412.JPG (93.31 KiB) Viewed 642 times

IMG_2413.JPG (54.88 KiB) Viewed 642 times

IMG_2414.JPG (59.47 KiB) Viewed 642 times

[AKweldshop]

IMG_2416.JPG (92.53 KiB) Viewed 642 times

IMG_2417.JPG (84.68 KiB) Viewed 642 times