What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

We are working on the suspension design


Image

Image

Image

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

Image

Image

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

Image

Image

Started welding the driver side link

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
Jim FLinchbaugh
  • Posts:
  • Joined:
    Thu Sep 01, 2016 11:56 pm
  • Location:
    Kalispell Montana

I'll admit to being a little envious. I really want to put a 4BT in my Tahoe, but the $$ is prohibitive.
By the time I get the engine, trans adapter and trans controller I'd be way upside down
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

Thanks, I will have wait till April to get back to this project

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

I am still out of the country but my wife picked up a ford superduty front dana 60 that is waiting to be narrowed for the jeep

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

We are back on the jeep project after spending time on deployment. ImageImage

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
User avatar
  • Posts:
  • Joined:
    Sun Sep 22, 2013 10:14 am
  • Location:
    Minneapolis Mn 55407

Jim FLinchbaugh wrote:I'll admit to being a little envious. I really want to put a 4BT in my Tahoe, but the $$ is prohibitive.
By the time I get the engine, trans adapter and trans controller I'd be way upside down
when one gets emotionally involved with a project,one becomes blind to the cost. Join the club,but you will get bragging rights. ;) ;)
A professional car restorer will tell that the dreamer will generally realize 20-40% of the cost + brag when he sells the ride.
Everlast 250EX
Miller 250 syncrowave
Sharp LMV Vertical Mill
Takisawa TSL-800-D Lathe
Coupla Bandsaws,Grinders,surface grinder,tool/cutter grinder
and more stuff than I deserve(Thanks Significant Other)
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

Driver side motor mount progress ImageImage

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Glad to have you back in one piece! Looks like you hit the ground running as soon as you opened the shop door.

BTW, The title of this topic has become a wee bit of an understatement. :lol:

I can rename it, if you would like a more appropriate title for what it's evolved into.

Steve
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

Otto Nobedder wrote:Glad to have you back in one piece! Looks like you hit the ground running as soon as you opened the shop door.

BTW, The title of this topic has become a wee bit of an understatement. :lol:

I can rename it, if you would like a more appropriate title for what it's evolved into.

Steve
Thank! A new title is a good idea.

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

It's your topic, so let me know what you come up with. Or we could just add, "and then some..."

Steve
User avatar
  • Posts:
  • Joined:
    Mon Feb 09, 2015 4:48 pm
  • Location:
    St. Johns, Michigan

Wow! Nice looking project you have going on there, you should have some nice low end grunt on tap. 1 ton up front should be about unbreakable. Are you going with a locker also?

Pete
Pete



Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

We are test fitting the exhaust now that we have the alt and ac compressor installed ImageImage

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

Machined the crank sensor pulse pattern into the 4bt cummins harmonic balancer so the stock jeep tj tach will workImageImageImageImage

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

Making he221w rurbo parts :) :P ImageImageImageImageImage

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

Turbo clearance has been an issue but might have found a solution by turning the charger 90 degrees ImageImageImageImageImageImageImage

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

Test fit looks decent so far ImageImageImageImageImageImage

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

Started tinkering with the downpipe ImageImageImageImageImageImageImageImage

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

Oil supply and return mocked in place ImageImageImage

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

Got to spend a few minutes working on the next piece of the exhaust ImageImage

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

There isn’t much room for anything but engine under that hood.
I have more questions than answers

Josh
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

I have been dragging my feet on this project but have made some good progress lately ImageImageImage

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
User avatar
  • Posts:
  • Joined:
    Fri Nov 14, 2014 5:13 pm

I have been dragging my feet on this project but have made some good progress lately ImageImageImage

Sent from my SAMSUNG-SM-G890A using Tapatalk
Jeep Cummins transplant specialist
User avatar
  • Posts:
  • Joined:
    Mon Nov 04, 2013 7:51 am
  • Location:
    The Netherlands

dzljon wrote: Image
Looks nice and clean!

Not sure if it's still a mock-up but I'd be a little concerned about the oil feed hose routing to the turbo in the picture..

Seems it's now running between the manifold and the downpipe. Could get awfully hot there even though it's a diesel and the peak exhaust temps are way lower than a gas one. PTFE (lined) hose can run up to 400F or so, but it will start degrading from that point onward. Also seems a little un-supported which could cause issues with the vibrations and weight of the hose cracking the fitting/connection to the turbo in the long run. (what? a big diesel having vibrations? nooooo.. of course not! :roll: )

Spraying hot oil over a turbo or manifold usually in the 'uh oh.. I think this is not so good' category :lol:

Could you perhaps run the oil hose from the block under and away from the manifold, towards the firewall and then up the firewall to get to the turbo from the other side? Just so it's far away from any 'hot pipes' as possible and with as little strain/stress on the hose and fittings?

Bye, Arno.
Post Reply