Welcome to the community! Tell us about yourself, your welding interests, skills, specialties, equipment, etc.
Post Reply
signinstaller
  • Posts:
  • Joined:
    Sun Mar 12, 2017 2:37 am

Hi guys & gals,

I'm the new guy today. I was installing signs -- like those big ones in Vegas -- for 20 years. Now I'm taking it easy working aboard the 14,000 deadweight ton, WWII Liberty Ship, SS Jeremiah O'Brien, located at Pier 45, Fisherman's Wharf, San Francisco, CA. I'm the in-house welder. The tenacity of the welders of the Greatest Generation (and Rosie the Riveter) really shows in every inch of this ship. 441-feet long and 56-feet wide made of 5/8-plates eight feet tall and twenty feet long, welded and riveted together in the span of only fifty-four days from keel laying to launching, (Tim Allan grunt here).

She's powered by a massive, 2500 horse power, triple-expansion steam engine pushing out a quarter millions pounds of torque to spin her 16' diameter brass propeller and push the fully loaded (9000 tons of cargo) up to the blazing speed of 11 knots across the North Atlantic to London a total of 7 times (14 Atlantic crossings) and then from D-Day plus 5 make a perilous 11 trips to Omaha Beach to aid in the landing at Normandy.

It's ugly, It's raw. But it's a bad ass ship and I get to help keep it from sinking! :D

Anyway, thanks for letting me in the group here.
Artie F. Emm
  • Posts:
  • Joined:
    Thu Jul 24, 2014 7:53 am

Welcome to the forum. You MUST post up pics!
Dave
aka "RTFM"
Farmwelding
  • Posts:
  • Joined:
    Thu Mar 10, 2016 11:37 pm
  • Location:
    Wisconsin

Welcome aboard. As Artie said-bring pictures to this forum of this ship-or any other work you want to-some of us are how do you say-fanatics if old navy vessels.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Mike
  • Posts:
  • Joined:
    Mon Dec 06, 2010 1:09 pm
  • Location:
    Andover, Ohio

Welcome...
M J Mauer Andover, Ohio

Linoln A/C 225
Everlast PA 200
signinstaller
  • Posts:
  • Joined:
    Sun Mar 12, 2017 2:37 am

IMG_20170222_111542541[1].jpg
IMG_20170222_111542541[1].jpg (88.21 KiB) Viewed 1025 times
IMG_20170302_124955095[1].jpg
IMG_20170302_124955095[1].jpg (57.42 KiB) Viewed 1025 times
IMG_20170223_103509641[1].jpg
IMG_20170223_103509641[1].jpg (72 KiB) Viewed 1025 times
IMG_20170218_144811012[1].jpg
IMG_20170218_144811012[1].jpg (64.28 KiB) Viewed 1025 times
IMG_20170223_132324897[1].jpg
IMG_20170223_132324897[1].jpg (108.26 KiB) Viewed 1025 times
IMG_20170223_103333031[1].jpg
IMG_20170223_103333031[1].jpg (107.29 KiB) Viewed 1025 times
IMG_20170212_164821485[1].jpg
IMG_20170212_164821485[1].jpg (88.82 KiB) Viewed 1025 times
I had to fabricate these sleeve hot well inlets. These direct the super hot water coming into the tank downward so the water has time to cool as it rises through the tank before being moved to the center tub for further cooling. The existing 73 year old inlets had rust-eaten holes like Swiss cheese and had to be repaired/replaced. The tank is narrow and deep and cutting the old one out was not feasible.
I had to fabricate these sleeve hot well inlets. These direct the super hot water coming into the tank downward so the water has time to cool as it rises through the tank before being moved to the center tub for further cooling. The existing 73 year old inlets had rust-eaten holes like Swiss cheese and had to be repaired/replaced. The tank is narrow and deep and cutting the old one out was not feasible.
IMG_20170220_151404387[1].jpg (88.59 KiB) Viewed 1025 times
Okay, you asked for pics, here they are .... The O'Brien moored at Pier 45; a few of the fine people who volunteer aboard - The one sitting (top left with hat and glasses) is our Chief Engineer, Jon Eaton.

You can sort of tell how large the ship is by it's piston connecting rods. The Rods are about 8-feet tall and 6" in dia.

The tank with the two inlets is called the "hot well". This is where very hot condensation enters the cooling and filtering (feed and filter) tanks before being reheated to steam in the boilers and reused to power the triple expansion steam engine. One of the first things I had to do when I arrived on board this year was to repair this critical element to the steam system. Without this, the O'Brien would not be able to operate.

Then there's a pic looking fore from the aft starboard gunner's house and from the bow looking aft on the port side.
Farmwelding
  • Posts:
  • Joined:
    Thu Mar 10, 2016 11:37 pm
  • Location:
    Wisconsin

You know- that is really freakin awesome! :D I want to do something like that once I am out of school and have settled somewhere. I saw more about the Illinois railway museum-about an hour away from me- and thought-how cool would it be to help fix and maintain those machines. Good test of kills working on old machinery and a good feeling afterwards. Keep up the work on that ship.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Now, that's the sort of thing I could see me doing in my "retirement". You couldn't pry me away from what I'm doing now, but at 48, I've become a realist and understand I can't just do this until I die and be satisfied. I also cannot be one of those "golf and fishing" retirees. That saying, "Idle hands are the Devil's playground?" Nope. An idle mind is the Devil's playground.

Steve S
User avatar
  • Posts:
  • Joined:
    Sun Feb 12, 2017 1:08 am
  • Location:
    N Georgia USA

Welcome to the forum! I used to live in the east bay and the wife and I would go hang out on the Embarcadero about once a month. Been on that ship, the Pompanito, Balclutha and hung out watching tourists go by while drinking Anchor Steam. Good times!
"Why is there never time to do anything right the first time but always time to do it again?"
User avatar
  • Posts:
  • Joined:
    Fri Oct 02, 2015 8:37 am
  • Location:
    Sydney, Australia

Did you see this wacko Canuckistanian getting around lol

https://www.youtube.com/watch?v=tsF2Oly19bA
Nowadays people know the price of everything and the value of nothing... Oscar Wilde
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

I imagine that ship would have large quantities of lead paint and asbestos around. Take care.
Post Reply