What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
Post Reply
Mihtu
  • Posts:
  • Joined:
    Sun Feb 12, 2017 11:01 am
  • Location:
    Upstate New York

More pics
Attachments
20170320_175523.jpg
20170320_175523.jpg (40.71 KiB) Viewed 1985 times
User avatar

snip_20170320184338.jpg
snip_20170320184338.jpg (13.9 KiB) Viewed 1974 times
snip_20170320184458.jpg
snip_20170320184458.jpg (23.85 KiB) Viewed 1974 times
If your using windows, before you upload you can rotate easily by "right clicking" on the pic and select either rotate clockwise or counterclockwise
snip_20170320185417.jpg
snip_20170320185417.jpg (7.58 KiB) Viewed 1974 times
Be sure your cursor in where you want the pic to go BEFORE you select "Place inline"

Hope that's clear
Richard
Website
Mihtu
  • Posts:
  • Joined:
    Sun Feb 12, 2017 11:01 am
  • Location:
    Upstate New York

If you want dimensions,I can come up with something,probly wouldn't be all that difficult to make you a drawing,I actually built it fron the picture I saw,then cut and welded what seemed to make sense,the guy who originally built one,tried to post instructions,but they threw me off a bit,kinda not in order,so I figured what have I got to lose,$3 in scrap and some practice,just so happens it actually worked!
PhillerTime
  • Posts:
  • Joined:
    Tue Jan 24, 2017 1:15 am

Looks like it works great!

Sent from my Nexus 6 using Tapatalk
User avatar
  • Posts:
  • Joined:
    Mon Feb 13, 2017 4:53 pm
  • Location:
    NW Fla

I would love some dimensions, that looks like a natural winner !!!!

creek
the heck with the duty cycle on the welder, tell me about the duty cycle on that grinder !!
Mihtu
  • Posts:
  • Joined:
    Sun Feb 12, 2017 11:01 am
  • Location:
    Upstate New York

Base for bench is 2 inch angle,you need an 8",and a 16" piece, the upright for axle are 8" also,the mandrel is a piece 24" long bent around a b-tank.then 2 pieces 6" long,I bent and welded the loop,then added in the 6" pieces, how I positioned them is put a level on the top flat,then added the 2 in the perfect verticle position,found the center ,drilled a half inch hole,for the axle bolt,which I welded to the 2 6" pieces,the rib on the back is a little too big,but it's what I had,1/8" solid rod,the cleat is 2 7" pieces with a roller,and another on top to hold the tubing when you pull it through!
Mihtu
  • Posts:
  • Joined:
    Sun Feb 12, 2017 11:01 am
  • Location:
    Upstate New York

Bender pictures
Attachments
20170329_222416.jpg
20170329_222416.jpg (25.96 KiB) Viewed 1711 times
20170329_222623.jpg
20170329_222623.jpg (38.52 KiB) Viewed 1711 times
20170329_222409.jpg
20170329_222409.jpg (27.87 KiB) Viewed 1711 times
20170329_222611.jpg
20170329_222611.jpg (47.58 KiB) Viewed 1711 times
20170329_222409.jpg
20170329_222409.jpg (27.87 KiB) Viewed 1711 times
20170329_222322.jpg
20170329_222322.jpg (40.09 KiB) Viewed 1711 times
20170329_222309.jpg
20170329_222309.jpg (40.74 KiB) Viewed 1711 times
20170329_222246.jpg
20170329_222246.jpg (36.9 KiB) Viewed 1711 times
User avatar
  • Posts:
  • Joined:
    Mon Feb 13, 2017 4:53 pm
  • Location:
    NW Fla

Thanks M !!
the heck with the duty cycle on the welder, tell me about the duty cycle on that grinder !!
Post Reply