What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

18451816_1499729213392704_2076136807_o.jpg
18451816_1499729213392704_2076136807_o.jpg (55.86 KiB) Viewed 2232 times
I made a sheetmetal folder. Plans came from Rortydesign.net. Material was 125x75x12mm(3x5x1/2) angle for the clamp, machined from 75 down to 52 for clearance, same size for folding beam. Base is 125x65 channel. Hinges are 25x75 flat bar and the adjusters are 50x16 flat.
Stand is 50x50x1.6 rhs(box) with a bit of 150x50 along the top. Don't zoom in on the welds, all stick welded with a little tig.
Attachments
18426904_1499749740057318_1116095209_o.jpg
18426904_1499749740057318_1116095209_o.jpg (66.84 KiB) Viewed 2225 times
18472038_1499729326726026_1689612883_o.jpg
18472038_1499729326726026_1689612883_o.jpg (77.79 KiB) Viewed 2225 times
18452329_1499729263392699_142157698_o (1).jpg
18452329_1499729263392699_142157698_o (1).jpg (60.44 KiB) Viewed 2225 times
18452083_1499729250059367_542737750_o.jpg
18452083_1499729250059367_542737750_o.jpg (59.35 KiB) Viewed 2232 times
18452070_1499729340059358_371421626_o.jpg
18452070_1499729340059358_371421626_o.jpg (86.59 KiB) Viewed 2232 times
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

very useful tool there.
nice job
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

Thanks Craig
exnailpounder
  • Posts:
  • Joined:
    Thu Dec 25, 2014 9:25 am
  • Location:
    near Chicago

Really nice! You're gonna have some fun.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

It's for a mate, he's building an MG-B racecar. He had money and no time, I had time and no money.
electrode
  • Posts:
  • Joined:
    Wed Nov 02, 2016 5:02 pm

weldin mike 27 wrote:It's for a mate, he's building an MG-B racecar. He had money and no time, I had time and no money.
Usually when I have time I don't have money either. ;) Good job on the brake. I bought one and know how useful they are. I have a slip roll too. 8-)
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

I assume it goes hand in hand. Make money lose time, gain time lose money. (However this guy made the choice to move an hour out of town, so that eats time every day)
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

If anyone is wondering about the small welds that don't tie completely off, the need to not distort the set up was king here. Small welds will work because its not under a huge amount of stress. This was hard for me to get my head around because I am used to doing 8mm fillets with a mig set to nuclear.
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

chill man, I'm sure your mate will never notice or understand how
you didn't distort the shit out of his bender...
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

motox wrote:chill man, I'm sure your mate will never notice or understand how
you didn't distort the shit out of his bender...
^^^^^^^^^^^^^^^^^^^^^^this.

Brilliant.
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

Nice job Mick,
Some questions of interest:
How much were the materials?
How hard was it to procure cut lengths of material in some of those less common sections?


Sent using Tapatalk
Flat out like a lizard drinkin'
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

It was designed that if you went nmuclear on it, it woud go to shit. Tjhat is all. Plus he's a mechanic, NDT operatror and all around general tinkerer, so he knows.

Coldie...Heres how it breaks down, I wish i had gone straight to the new steel option, I spent far too much time looking for second hand.


*3 metres of angle (third of a length) from Surdex $110, I had to push a little to get these answers as a couple of guys said they wont sell part lengths. But it is a standard stocked size.

* 1400mm 125x65 mm channel, bought from a local engineering joint, $40 bucks

* Odd pieces of flat bar, scrap from around**

* 150x50 rhs and the parts from my friendly local second hand man, mates rates $20 bucks.

*RHS for the a frame, customer had that already.

Bolts and bits, from my collection of bibs and bobs.

The plans are copy righted, I have no need for them any more so if the wind blew them to queensland, I wouldn't be worried.
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

mike
not trying to dis your mate just compliment you.....
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

That's the thing if I buy new I end up with odd sections on the rack when I'm trying to reduce bar stock. Still I have 5" channel on the rack that I would love to use up and I have 150x150 rhs that I could turn into 150x50 the hard way. The rest is not too bad to end up with an awesome folder. The angle is a bit of a pain.


Sent using Tapatalk
Flat out like a lizard drinkin'
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

When i was looking for angle, i found so much 150x q0 angle it wasn't funny. That, with an inbuilt stiffener would do the job.
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

PM sent
Flat out like a lizard drinkin'
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Coldman wrote:PM sent
Regarding the forecast for prevailing winds, I would assume.

Steve
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

Fine with a chance of showers


Sent using Tapatalk
Flat out like a lizard drinkin'
Brettmm92
  • Posts:
  • Joined:
    Wed May 10, 2017 11:58 pm
  • Location:
    North Carolina

I am really impressed!

I have two questions.. How do you adjust it for different sizes of metal, and may I see the plans?

Thanks,

Brett
I wish I could do things for the second time, the first time.
Shoot for perfect, get great, think it's only good
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

Brett,

The metal thickness is changed by the two T screws on the back edge, they are supposed to have a circlip on them but I didnt deem it apppropriate for this particular job (read: it didnt work) so we are going to drill and split pin them. They have a machined shoulder which pushes on the angle for moving forward and the pin drags it back,

Plans are here:

https://rorty.net/sheet-metal-folder
Post Reply