Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
The what I welded today (/whenever) thread (pics please)
Post Reply
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Two cans of "Why Bother" welded together?

You don't want people looking at that weld and thinking, "Why bother?"

:lol:

Steve S
Top
Paul463
  • Posts:
  • Joined:
    Wed Oct 01, 2014 7:38 pm

Made a towing point for the front of my side by side atv.
Image
Top
taz
  • Posts:
  • Joined:
    Mon May 26, 2014 12:43 pm
  • Location:
    Athens - Greece

Well, I apologized beforehand did't I :lol:

1.6mm 1.5% lanthanated tungsten (because this is the only 1.6mm I have :) ) ground to a point
No 5 cup with stubby gas lens
2.0mm 4043 filler
100Hz
60% negative
40A set max and used a foot pedal but never had to floor it.

I had another empty coke (light :lol: ) can which I have used to find my settings.

These things stink when welded. I had to stop and put on my ADFLO :?
Top
exnailpounder
  • Posts:
  • Joined:
    Thu Dec 25, 2014 9:25 am
  • Location:
    near Chicago

Paul463 wrote:Made a towing point for the front of my side by side atv.
Image
Nice job...Ill bet they would have bent you over at the store for that!
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Top
crouchy
  • Posts:
  • Joined:
    Sat May 23, 2015 4:18 am
  • Location:
    worthing, England

You from the UK spokesy??
Top
User avatar
  • Posts:
  • Joined:
    Sun Oct 27, 2013 10:57 pm
  • Location:
    Big Lake/Monticello MN, U.S.A.

Paul463 wrote:Made a towing point for the front of my side by side atv.
Image
Hey that's pretty cool :)

Nice use of two thin pieces combined.
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Top
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

@crouchy, spokesy is long gone, haven't seen him round here for many a day.
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

Been a while since I welded up a steel frame. Been mostly brazing steel and welding aluminum since March. Nice getting back in the saddle.
Attachments
DSC00716.JPG
DSC00716.JPG (26.84 KiB) Viewed 3172 times
Top
User avatar

zank wrote:Been a while since I welded up a steel frame. Been mostly brazing steel and welding aluminum since March. Nice getting back in the saddle.
Very nice Zank, my first thought was if the weld would distort the bottom tube enough to cause a problem with those threads on the ID, apparently not though
Richard
Website
Top
noddybrian
  • Posts:
  • Joined:
    Thu Jan 24, 2013 12:13 pm

Getting back in the saddle !! nice one Zank we see what you did there !
(oh & as always your welds make me wish I was not over 50 with worsening eyesight ! great work )
Top
dirtmidget33
  • Posts:
  • Joined:
    Tue May 13, 2014 5:22 pm

This might seem like an odd project but it was different so I thought I would post it. Our dog Rudy the beagle got hit by a car, we buried him and needed a headstone so I made one out of some 1/8 inch angle 304 stainless. First time I tried to write words by padding beads. I need practice at doing that never had to do it before. I should have cut a groove to follow would have made it easier to write words.
0603151409.jpg
0603151409.jpg (51.05 KiB) Viewed 3343 times
0603151446.jpg
0603151446.jpg (32.73 KiB) Viewed 3343 times
0603152155.jpg
0603152155.jpg (49.3 KiB) Viewed 3343 times
0603152219.jpg
0603152219.jpg (53.56 KiB) Viewed 3343 times
0604151723.jpg
0604151723.jpg (169.59 KiB) Viewed 3343 times
0604151724.jpg
0604151724.jpg (144.2 KiB) Viewed 3343 times
why use standard nozzles after gas lens where invented. Kinda of like starting fires by rubbing sticks together.
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

A beautiful tribute.
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

sucks loosing a good friend.
glad to see you cared enough to
do such a touching project in his
name.
you were a true friend.....
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
exnailpounder
  • Posts:
  • Joined:
    Thu Dec 25, 2014 9:25 am
  • Location:
    near Chicago

That is really cool. My dog is my best friend and I don't ever want to say goodbye to him but..I feel for you. That is an awesome tribute that will last forever.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Top
User avatar

Well done, I thought your words came out quite well. Sorry for your loss
Richard
Website
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

Image
Tight makes right by Mike Zanconato, on Flickr

Image
Tight makes right by Mike Zanconato, on Flickr

Image
Tight makes right by Mike Zanconato, on Flickr

Image
Tight makes right by Mike Zanconato, on Flickr

Image
Tight makes right by Mike Zanconato, on Flickr
Last edited by zank on Sat Jun 06, 2015 7:39 am, edited 1 time in total.
Top
dirtmidget33
  • Posts:
  • Joined:
    Tue May 13, 2014 5:22 pm

Thank you everyone he was a pretty neat little dog.

@Zank those are some great fit ups. Nice to see someone take time to get perfect fit ups. Great prep work leads to outstanding products.
why use standard nozzles after gas lens where invented. Kinda of like starting fires by rubbing sticks together.
Top
User avatar
  • Posts:
  • Joined:
    Wed Aug 06, 2014 12:48 am
  • Location:
    Melbourne, Australia

@Zanc

You continue to amaze us. You are a true artisan!

Trev
EWM Phonenix 355 Pulse MIG set mainly for Aluminum, CIGWeld 300Amp AC/DC TIG, TRANSMIG S3C 300 Amp MIG, etc, etc
Top
taz
  • Posts:
  • Joined:
    Mon May 26, 2014 12:43 pm
  • Location:
    Athens - Greece

@ Zank.
Someday I may add one of your frames to my road bike fleet. Hopefully even if you are one of the big name builders you will remember us poor and lonely welding pals and make a space on your closed by then waiting list (insert smiley of sad puppy with wet eyes).

To stay on topic, here is my second try on welding aluminum cans. I figured I needed something to top my first try of 2 alcohol free beer cans welded together so without further ado I present my second try of......

ImageWelding by Taz00, on Flickr

Sh!t, I am going to take a lot of heat for this... :lol:
Top
User avatar
  • Posts:
  • Joined:
    Sat Mar 30, 2013 11:49 am
  • Location:
    Sweden

At least we know where you got your nick from now Taz ;)
Top
WJH
  • WJH
  • Active Member
    Active Member
  • Posts:
  • Joined:
    Fri May 29, 2015 8:27 pm

Zank, do you serve a niche market, or do you have more work than you possibly can handle in a 40 hour work week? I went to your webpage, very impressive, as is your welding!
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

Thanks guys! Always trying.

WJH,the challenge is being a one man band. I wish I could just make frames, but all of the other business related stuff takes up a good portion of the week. I generally have 8-10 frames worth of work lined up at any one time. My goal is to make a frame and ship a frame each week. That works pretty well for me because I decided I needed to do a little better job on the work/life balance after our second son was born. I try my best to limit my work week to 45 hours and then do some work at night when the kids and the misses are sleeping. We brought number three (a little girl!) home last week, so now I'm even more focused on being as productive as I can be during my work hours and limit my work time at home to a minimum. Mostly because I need the sleep!

Here's the gang. David (3), Luke (2), Hannah (1 week)

Image
0531151349c by Mike Zanconato, on Flickr
Last edited by zank on Mon Jun 08, 2015 7:50 am, edited 1 time in total.
Top
User avatar
  • Posts:
  • Joined:
    Wed Aug 06, 2014 12:48 am
  • Location:
    Melbourne, Australia

Congratulations on your new arrival Mike. You've got a great little team there. Beats welding for sure!
EWM Phonenix 355 Pulse MIG set mainly for Aluminum, CIGWeld 300Amp AC/DC TIG, TRANSMIG S3C 300 Amp MIG, etc, etc
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

Thanks, Trev!!!!
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

Nice work there, Taz. Funny that they brand Diet Coke as Coke Light over in Greece.
Last edited by zank on Mon Jun 08, 2015 8:25 am, edited 1 time in total.
Top
Post Reply

Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”